Home

Wire Partition

Steel-Aluminum Fencing

Vinyl Fencing

Auto Gate Operators

Chain-Link

Screens

Contact Us

Ornamental Aluminum

Welded Steel Wire

Wood Fencing

Guard Rails / Posts

Post & Rail

Fence Parts

 

Earl Style Ornamental Fence
Back to Ornamental Aluminum Railings

   
Material Specifications Drawings  Colors

Our Earl style Aluminum ornamental railing is a classic fence for security. This fence is stands tall and looks impenetrate able and stoic and we offer wide variety to choose from.

We do not just manufacture & sell fences we sell the complete range of tools hardware & accessories that go along with it & to install it.

If you are a fence company looking for fencing tools or a homeowner looking for fence or an Architect looking for specification & designs of fences or have your own custom design we have it all.

In short, All Guard Fence is your single source for all your fencing and hardware need.

Standard Colors

     
Black White Ensor Green Chocolate

Special Colors
Additional Cost / Custom Avail.

     
US Blue Red Almond Bronze
Safety Yellow Redwood Grey Olive Green

MATERIAL SPECIFICATIONS (ORNAMENTAL ALUMINUM)
 
MATERIAL SPECIFICATIONS

Standard sections are available in 6' or 8' widths (182.88cm or 243.84 cm) and heights from 1' to 20' (30.48 cm to 609.60 cm). Custom sections are available when desired.

 

MATERIAL-VERTICAL ALUMINUM PICKETS

Vertical aluminum pickets shall be extruded from 6063-T5 aluminum alloy with a minimum yield strength of 35,000 psi (240 Mpa) and a minimum tensile strength of 38,000 psi (260 MPa).

 
INCHES
MM
GAUGE
CENT SPACING
LBS/FT
KG/M
5/8
15.88
0.050 (1.27 mm)
4 (114.30 mm)
0.168
0.076
5/8 x 1
15.88 x 25.40
0.050 (1.27 mm)
5(127.00mm)
0.179
0.081
19.05
0.062 (1.58 mm)
4 (114.30 mm)
0.168
0.076
1
25.40
0.062 (1.58 mm)
5(127.00 mm)
0.280
0.127
1
31.75
0.062 (1.58 mm)
6 (152.40mm)
0.380
0.172
1
38.10
0.062 (1.58 mm)
6 (152.40mm)
0.424
0.192

 

MATERIAL-HORIZONTAL ALUMINUM RAILS

Horizontal aluminum rails shall be extruded into a channel from 6063-T5 aluminum alloy with a minimum yield strength of 35,000 psi (240 Mpa) and a minimum tensile strength of 38,000 psi (260 MPa).

 
INCHES
MM
SIDE WALLS
TOP WALLS
PICKET SIZE
LBS/FT
KG/M
1
25.40
.082(2.08 mm)
.055(1.40 mm)
5/8(15.88 mm)
0.266
0.121
1
31.75
.125(3.18 mm)
.125(3.18 mm)
3/4(19.05 mm)
0.526
0.239
1 5/8
41.28
.100(2.54 mm)
.070(1.78 mm)
1(25.40 mm)
0.895
0.406
1 5/8
41.28
.135(3.43 mm)
.135(3.43 mm)
1(25.40 mm)
1.270
0.576
2 X 2
50.8 x 50.8
.060(1.52 mm)
.060(1.52 mm)
1(38.10 mm)
0.424
0.192

 

MATERIAL- ALUMINUM POSTS

Aluminum posts shall be extruded from 6063-T5 aluminum alloy with a minimum yield strength of 35,000 psi (240 Mpa) and a minimum tensile strength of 38,000 psi (260 MPa).

 
INCHES
MM
GAUGE
LBS/FT
KG/M
2
50.80
0.060(1.52 mm)
0.604
0.274
2
50.80
0.125(3.18 mm)
1.250
0.567
2
63.50
0.075(1.91 mm)
0.913
0.414
2
63.50
0.125(3.18 mm)
1.397
0.634
4
101.60
0.187(4.75 mm)
3.422
1.552
 

GATES

All gates welded first and then polyester powder coated after fabrication. Types of gate available: Single, double drive, cantilever, overhead, and rolling. Gate operators can be installed on all gates. Types if hinges and latches are furnished according to gate size and usage.

 

HARDWARE (BALL TOPS, BRACKETS, FINALS AND SCROLLS)

All hardware shall be zinc alloy die cast AG40-A as per ASTM B86 with a tensile strength of 41,000 psi (282 Mpa) and a Brinell hardness of 82.

 
ASSEMBLY

Sections and gates shall be factory-assembled with pickets welded or screwed using a #6 1dacrotized screw. Posts shall be predrilled and routed to receive the horizontal rails. The rails brackets (when needed) shall be attached by (6.35 mm) screws. Ball tops, brackets, finials, and scrolls shall be factory assembled. Racked and radius sections are also factory-assembled.

FINISH

All components shall go through a five-stage process: 1) Rinsed and cleaned with clear water 2) Phosphate treated to etch the surface  3) Rinsed again with clear water 4) Components are oven-dried prior to powder coating 5) Polyester powder is then applied by the electrostatic spray process to a thickness of 2.5 mils (.0635 mm). The metal is then oven-backed at 450o (232o C) for 14 minutes. Standard colors available: Black, Chocolate, Ensor Green, and White. Custom colors are available upon request.

 

 

 

 

 

All Guard Fence 201-939-8551 All types of Fence in New Jersey, NJ, a Fence, Aluminum Fence, Stockade Fence, Security Fence, Commercial Fence, Vinyl Fences. All Guard fence is a leading full-service, Professional fence sales, Service and installation company. Call us for Security Products. Created by Demetrios Sales Co.

2008-2012 All Guard Fence Company, Inc. Tel: (201) 939-8551 email: allguardfence@verizon.net

Webmaster: Demetrios Sales Co